|
|
ABS Brakes Problems
No brakes. Recently we changed pads and the master cylinder, and we have bled all lines and get nothing but brake fluid back. When the vehicle is started the brakes go to the floor. When the brakes are pumped up I have brakes. Put to just push on them they go to the floor. We will try bleeding from the back to the front and see if that works.
Try bleeding the master cylinder after it has been installed, the same way you bleed lines. Just crack the lines a smidge. And I mean a tiny smidge. Just for future reference, when bleeding brakes, always go to furthest wheel from master cylinder first, which on most vehicles means, rt.rear, left.rear, rt.front, left front. (from sitting in drivers seat.)
|